| Availability: Usually ships in 24 hours Ships from and sold by Amazon.com 122 new or used available from $14.88 Average customer review: (1578 customer reviews) |
Product Description
The SkipDR Classic disc repair system is a manual device that can fix minor scratches to CDs and DVDs. It can repair up to 25 discs using a patented FlexiWheel, and resurfacing fluid to smooth the surface of damaged discs. The patented FlexiWheel, with its unique microfrictional surface, uniformly repairs damaged discs without losing data. As well as handling standard optical discs, the SkipDR Classic can also repair discs for: PlayStation 1 and 2; XBOX / XBOX 360, and the Nintendo Wii. The repair kit contains: a FlexiWheel, rejuvenating fluid, and a special drying cloth and felt buffing square (Packed inside the handle of the unit).Product Details
- Size: One Size
- Color: Black
- Brand: Digital Innovations
- Model: 1018300
- Released on: 2016-01-27
- Fabric type: na
- Number of items: 1
- Dimensions: 9.02" h x 3.94" w x 5.87" l, 1.00 pounds
Features
- Fixes scratched DVD, CD, PS1, PS2, XBOX & XBOX 360, Wii optical disks to eliminate skipping, freezing & distortion
- Radial resurfacing is scientifically-proven to completely repair most minor play-side scratches
- Process smoothes surface scratches to renew the disc's protective layer, leaving disc data unaffected
- Patented FlexiWheel repairs up to 25 discs and works gently enough to safely repair the same disc multiple times
- Includes SkipDr Rejuvenating Fluid, blue drying cloth, and felt buffing square (Packed inside the handle of the unit)
Customer Reviews
Most helpful customer reviews328 of 337 people found the following review helpful.
By Cris Fair
I bought this to fix my 7 year old's DVD collection. She had a lot of DVD's that were scratched. This little machine works well so far. A couple of spins fixes most DVD's and the ones that are really scratched have to be put through another couple of spins before they work again.
TIP: The "cleaning solution" that comes with this machine is just distilled water with a little bit of rubbing alcohol ;) So you don't need to order any more bottles online. Just mix like 95 parts water to 5 parts rubbing alcohol.
602 of 613 people found the following review helpful.
By Paul R. Potts
I've used both the older version (with the green wheel) and the newer version (with the orange wheel) and they both have been very helpful with numerous discs. I'm a parent and I have friends who are parents. I've used it to make CDs and DVDs which had become almost unplayable work reasonably well again, avoiding the cost of replacing the disc.
It's important to understand what this thing does. Basically, you start with a CD or DVD with minor surface damage on the bottom side (which is where the laser hits it). The scratches have sharp edges, which cause the laser light to scatter, and you have read errors. This device will lightly sand down the plastic surface, evening it out, taking scratches out, and creating a radial pattern. Then you take the felt pad and buff out the pattern so it is less likely to cause light scattering. The result is a "scuffed up" disc that is covered with tiny scratches, but the original damage is sanded off. The laser can, for the most part, see right through these minor scratches and "hazing" since it focuses _below_ the surface.
So, the idea is to basically scratch out the scratches. How well it turns out is affected, in large part, by how diligent you are with the felt pad. Also, for the first stage, you _must_ use enough of the spray to keep the disc wet; if you let it run dry and keep cranking the abrasive wheel will produce deep radial scratches and it will be hard to buff them out; you may wind up doing more damage then the original damage you are trying to fix, and it will take you forever to try to get them out.
If the scratches or gouges are deep, you may have to run it through a few times. If they are very deep, it just won't work. If there is damage to the label side of a CD then it won't work; the data is destroyed. DVDs work slightly differently, so label-side damage may not be quite so critical.
Anyway, it works. For example, a recent DVD I fixed up had several unplayable sections, where the playback would skip ahead 30 minutes or more. It had some deep "dings" in it. I ran it through the process four or five times, to the point of diminishing returns, and it got a lot better, but it still has some short freezes and stuttering in the video playback. The "dings" are still slightly visible both to the naked eye and the laser. For less-damaged DVDs, the results will probably be better, but there's no guarantee you can make the disc read perfectly again. I recommend it, but it isn't magical. It's not a good substitute for keeping the DVDs away from the kids to begin with.
77 of 85 people found the following review helpful.
By seth bigelow
Did not work, waste of money. Used several times to try and repair Xbox game, still does not play and looks worse than before. I followed the instructions exactly.
See all 1578 customer reviews...
No comments:
Post a Comment