| Availability: Usually ships in 24 hours Fulfilled by Amazon and Sold by Storm Store 2 new or used available from $39.99 Average customer review:  (12 customer reviews) |
Product Description
Notice Before Use (Please Read It Carefully):1. Open the bluetooth of your device to match the bluetooth barcode scanner,press the yellow button for 10 seconds, then match them.
2. Maintain a bevel between the wireless bluetooth barcode scanner and the barcode to make a best reading.
3. Do not keep the bluetooth scanner in 90°with the barcode,otherwise the scanner can't read.
4. The bluetooth scanner must aim at the bacode and the beam must cover the whole barcode.If don't , error maybe occur.
Features:
Desktop computer and bluetooth wireless working mode:Insert the bluetootn receiver to computer, install the driver, then open scanner to match.
Desktop computer and wired working mode:Insert the bluetootn receiver to computer, connect USB cable with scanner, then you can scan.
Laptop computer and bluetooth wireless working mode:If your computer has bluetooth, NO NEED to insert the bluetooth receiver, directly open scanner to match.
Cellphone and bluetooth wireless working mode:Open the scanner, start the bluetooth of cellphone, press the yellow button for 10 seconds, then match them.
Match scannert to other device:Start the bluetooth of device, press the yellow button for 10 seconds, then match them.
Specification:
Material: ABS+PC+TPE
Power supply: 3.7V-DC5V
Scanning width: 2.0-11.8 inch
Operating power: 250mw(operation mode);35mw(standby mode);500mw(max peak)
Operating current: 50ma(operation mode);7ma(standby mode);100ma(max peak)
Dimensions: 3.9* 2.8*6.3 inch
Weight: 4.6oz
Package:
1x Wireless Bluetooth Barcode Scanner
1x 3.0 Bluetooth Receiver
1x USB Cable (4.43ft)
1x Paperclip
1x User Manual
Product Details
- Color: Yellow
- Brand: Excelvan
- Model: BP-9502BL
- Dimensions: 3.50" h x 7.00" w x 8.60" l, .65 pounds
Features
- Brand: Excelvan (1 year warranty and friendly customer service)
- Support bluetooth mode & handhold mode
- Two connection modes: Wireless and USB cable connection, with USB 3.0 bluetooth Receiver and USB Cable, Plug and Play
- Very low energy consumption: Integrated 800mAh Li-Ion battery, continuous scanning barcode for more than one week; It can be charged by any USB 3.0 port
- Powerful decoding function, which realizes that the barcode scanner can read codes better and faster in many places, such as warehouse, supermarket, hotel,department
Customer Reviews
Most helpful customer reviews5 of 5 people found the following review helpful.
A great little scanner with one problem......By Kevin Saucier
I bought this scanner 1 week into a 2 week project where I was required to scan a couple thousand computers a week. The first week saw me tethered to a laptop with a wired scanner. While that worked OK, it didn't look overly professional so I thought I'd give this unit a shot. I tried it out at home using my existing Logitech Bluetooth dongle and it continually tried to make me enter a code (as it would for a keyboard). I tried scanning entering the digits from an existing barcode, then scanning it with the scanner, but to no avail. After 10 minutes of frustration, I tried the included Bluetooth dongle and it didn't ask for a code and just worked. I tried a few barcodes that I had in my office and everything seems to work pretty well. I packed up the scanner and dongle and took it back to work for week 2.
When I plugged the dongle into my laptop, I found that it had to be plugged in just right in order for it to be recognized by Windows. Unfortunately, just right meant that it had to be about 1/16" or so out. Unfortunately, if it got bumped even slightly, Windows would lose the dongle and the scanner disconnected. I tried a few times and couldn't make it reliable so I moved to a different laptop that had built in Bluetooth. It paired easily and I was on my way.
While using the scanner, the first thing I noticed was that it timed out (and turned off) after 20 seconds of inactivity. This caused the unit to disconnect (but not unpair) from the laptop. When you click the trigger, it woke up and (usually) reconnected within 10 seconds or so. Unfortunately, a number of times, it just refused to reconnect and I had to turn off Bluetooth on the laptop and turn it back on again. This became incredibly annoying so I figured I would change the timeout setting on the device, as I had seen that you could do so by scanning barcodes in the manual. Oddly, the barcodes give you about 7 options for the timeout, but they jump from 20 seconds to 20 minutes or more. Something more in the realm of 2 minutes or 5 minutes would have been ideal. Either way, I figured 20 minutes was better than 20 seconds and proceeded to scan the programming code. Again, unfortunately, the scanner would not read the programming code (even though it would read other programming codes). My wired scanner read the code just fine but this unit refused to read it. I immediately jumped on the computer and sent an email to the vendor hoping they could give me an easy answer.
Over a week later, still no reply. I ended up having to finish out the week of work clicking the trigger every 15 seconds or so to keep the unit alive and, when I did let it go to sleep, hoping it would reconnect again. Luckily, I bought this during Amazon's holiday return time so I have until the end of January to return it. If I can't find a way to change the timeout before then, it will be going back. It's a decent unit that scans well (even in the dark), has a good range, is comfortable in the hand, and is overall a good scanner, but I can't deal with the incredibly short timeout and having to hope that it reconnects each time it turns off.
0 of 0 people found the following review helpful.
it works fine. It's cheap (something is loose inside)By Vince Becquiot
Alright, it works fine. It's cheap (something is loose inside).
My biggest issue is the charging cable. It's Ethernet and it's plugs so far in that you need a mini screwdriver to remove it, it's a crappy design.
I also imagine that it will greatly reduce the life of the cable/unit.
It also wants to shut down right away which is very annoying, even after selecting a longer timeout period.
My advice would be spending more on a better unit, I know will.
0 of 0 people found the following review helpful.
So-soBy Terri Losty
Didn't work for our application (isbn scanning) but it might for you.
See all 12 customer reviews...
No comments:
Post a Comment